This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Conventional Manual Call Points
Conventional manual call points are wall mounted devices used to manually trigger the fire alarm system in the event of a fire, allowing building occupants to be alerted and evacuate. Manual call points are typically installed near exits, high risk locations and other key areas of a building such as stairwells. They are most commonly activated by pressing a button or breaking a glass element on some older models, this sends a fire signal to the fire alarm control panel which will trigger the alarm sounders. They are hard-wired to the fire alarm panel via radial zone circuits.
We stock a range of high quality conventional manual call points from leading manufacturers such as KAC and Apollo.
- Hochiki CCP-W/Y Weatherproof Conventional Call Point - Yellow Case
CCP-W/Y
> Complies with BS5839 Part 2
> Push-fit terminals can accommodate up to a 2.5mm solid conductor
> Other colours available on request IP rated to IP67£68.96 £57.47 As low as £65.78
- Hochiki CCP-W(LED) Weatherproof Conventional Call Point with LED Red
CCP-W(LED)
> Approved to EN54-11:2001
> Terminals can accommodate up to a 2.5 mm solid conductor
> Ingress Protection rated to IP67£71.44 £59.53 As low as £68.14 - ESP MAGfire Surface Mounting IP67 Red Manual Call Point (SCP2RIP67)
SCP2RIP67
> Conventional manual call point
> Resettable element
> Weatherproof - IP67 rated£100.10 £83.42 As low as £95.48
- Fike Conventional Manual Call Point with Cover (400-0006)
400-0006
> Re-settable Element
> Can be Flush Mounted
> Includes Protective Cover£12.31 £10.26 As low as £12.02
