This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Siemens FDM365-RP Cerberus 360 Manual Call Point (No backbox)
SKU
S54311-F111-A1
£33.67 £28.06
The Siemens FDM365-RP manual call point is designed for immediate manual actuation of a fire alarm. For indoor applications. Direct alarm actuation by pushing on the plastic element. The pushbutton is reset with the key and the device is ready for operation again. For surface- and recess-mounted feed lines in easily accessible places.
- Buy 10 for £33.14 £27.62 each and save 2%
- Buy 20 for £32.63 £27.19 each and save 3%
- Buy 50 for £32.11 £26.76 each and save 5%
The Siemens FDM365-RP manual call point is designed for immediate manual actuation of a fire alarm. For indoor applications. Direct alarm actuation by pushing on the plastic element. The pushbutton is reset with the key and the device is ready for operation again. For surface- and recess-mounted feed lines in easily accessible places.
For surface mounting, one of the FDMH295-x back boxes must be ordered separately.
| Key Features |
|---|
| > Manual call point for the addressed fire detection system Cerberus FIT FC360 > Direct activation: type 'A' according to EN 54-11 > Communication via C-NET detector line (addressed individually) > For surface and recessed mounting (surface back box sold separately) > With resettable plastic insert > Two-wire installation for all cable types > Integrated line separator: The defective part on the detector line is located via the fire control panel and isolated between two C-NET devices > Built-in alarm indicator (LED) > Address automatically issued during commissioning > Protected electronic components > Connection terminal DBZ1190‑AB (accessory) can be mounted if shielded cables are used > This device is functional exclusively together with a Cerberus FIT fire control panel FC360 |
| Manufacturer | Siemens |
|---|---|
| MPN | FDM365-RP |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Operating voltage | DC 12…33 V |
| Operating temperature | -25…70 °C |
| Protection category | IP44 |
| Relative humidity | ≤95 % rel. (no condensation) |
| Standard | EN 54-11 , EN 54-17 |
| Dimensions (W x H x D) | 87 x 87 x 20 mm |
| Quiescent current | 180 μA |
| Storage temperature | -30...+75 °C |
| Terminal block | 0,28…1,5 mm2 |
| Communication protocol | C-NET |
| Color | Flame red, ~RAL 3000 |
| System compatibility | C-NET -> FC360 |
| Number of addresses | 1 |
Related Products
Check items to add to the cart or
More from Siemens
