Advanced GO Single Loop Fire Alarm Panel (Apollo/Hochiki Protocol) (GO1)
In Stock
Product Details for Advanced GO Single Loop Fire Alarm Panel (Apollo/Hochiki Protocol) (GO1)
The Advanced GO1 is a cost-effective, non-networkable, single loop fire alarm control panel compatible with Apollo and Hochiki device protocols and capable of accommodating up to 50 addressable devices.
The new Go series is an evolution for non-networked single-loop fire alarm systems. Its innovative design includes several improvements and upgrades to critical safety features, while retaining all the benefits and user-friendly operation of an Advanced fire alarm control panel.
A new ergonomic layout of control panel is combined with our high resolution, high contrast, graphical LCD display. The tactile keypad allows simple select-and-click programming for faster engineer configuration and simple end-user operation.
Functional improvements include 15 integral zonal LEDs which enable instant identification of alarm locations, and ensure compliance with BS5839 without the cost of a separate LED zone card.
The new PCB integrates both control panel and peripherals on the same board and incorporates the latest high-speed microprocessor technology, for 9 times faster operation than MxPro 4.
Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications, from small to medium systems.
All Go series panels are fully programmable on site via the control panel display or with our updated, easy-to-use PC Configuration Tool.
Digital-Ready Fire Alarm Control Panel
The future-proof Go series is digital-ready for connection with the intuitive AdvancedLive Cloud app.
AdvancedLive provides remote visualisation and management of a fire system via instant communication with enabled devices, and reduction of false alarm evacuation occurrence and fire safety risks.
Key Features of the GO1 |
|---|
|
> Apollo/Hochiki Protocols
> Up to a maximum of 50 addresses - More addresses available on the GO+ 1 Loop Panel > Graphical LCD user interface, LED indicators & push buttons > Installer-friendly Auto-learn, Loop detection and On-board scope facility > 500 fire + 5000 general event logging, with advanced diagnostic precision to aid installation & fault-finding > Integral 15 Zone LEDs ensures compliance with BS5839, with 35 additional software indication zones > Uses a new Configuration Tool with Office365 appearance with better graphics and easier functions for programming > Two on-board Sounder outputs, three on-board Relay outputs > Optional 3 monitored input/outputs for Fire/Fault routing (with P-Bus adaptor & routing card) for full EN54 compliance when connected to an Alarm Receiving Centre > Dedicated USB Type B port for direct PC connection > Ethernet port for Cloud connection via AdvancedLive, to provide remote notification and panel management > Innovative 'no hinge' removable door and hangable chassis for easier installation > Employing an identical monitoring feature as the MxPro 5 series, the Go series meets the requirements of EN54-13 (2005) Clauses 5.3.4.1 and 5.3.4.2 (partial open & short circuits) for optimal fire system performance and complete peace of mind > Certified to EN54 Parts 2 and 4 by FM Approvals |
| Brand | Advanced Electronics |
|---|---|
| Manufacturer Part No. | GO1 |
| Product Series | GO |
| Primary Power Source | Mains Powered (230V) |
| System Type | Addressable |
| Number of Loops (Fitted) | 1 |
| Max No. of Loops Possible | 1 |
| Number of Zones | 50 |
| Protocol Compatibility | Apollo XP95, Apollo Discovery, Apollo CoreProtocol, Hochiki ESP |
| Colour | Grey |
| Warranty | 3 Years |
FAQ’s for Advanced GO Single Loop Fire Alarm Panel (Apollo/Hochiki Protocol) (GO1)
Product Specification for Advanced GO Single Loop Fire Alarm Panel (Apollo/Hochiki Protocol) (GO1)
| Protocols | Apollo (XP95, Discovery), Hochiki (ESP) |
| Number of Loops | 1 |
| Loop Current | 500mA max |
| Number of Fire Zones | 50 max |
| Sounder Outputs | 2 x 1A Programmable (1A total) |
| Relay Outputs (Programmable) | 3 x 1A 30VAC/DC (max) to 10mA 5V (min) |
| Auxiliary Output | 24V DC, 100mA (With GOP-001 Fitted) |
| Display | LCD White backlit 240 x 64 Graphical LCD |
| Programmable Inputs | 1 x Key Switch, 1 x monitored |
| USB | USB type B interface for PC connection |
| Network | None |
| Ethernet | 10-Base-T, 100-Base-T |
| Event Log | 5000 Events with Diagnostics + 500 Fire Events |
| Enclosure | Steel IP30 RAL7035 |
| Dimensions H x W x D mm | 345 x 345 x 87 |
| Weight (excluding batteries) | 4Kg |
| Temperature Range | -5°C to 40°C |
| Humidity (RH) | 95% max |
| Cable Entries | 14 x 20mm knockouts at top |
| AC Supply | 220-240V, 50 – 60 Hz, 1.0A max |
| Safety | EN62368-1, Class 1, Pollution Degree 2, Overvoltage Category II |
| Battery Capacity | 24V 4Ah Internal (min), 24V 7Ah Internal (max) |
| Charging Current | 0.35A Temp Compensated |
| Deep Discharge Cut-off | 19.5V |
| Power Supply | On-board 24V DC, 1.5A High Efficiency Off-Line Switched Mode |
| Output Voltage | 18.0V – 28.0V |
| Ripple (Vpkpk) | Up to 1.0V |
| Max Battery Ohms | 1.8Ω ± 0.1 Ω |
| Imax(a), Imax(b) | 1.15A, 1.5A |
