Ziton Weatherproof wall mount VAD, White body, red flash, W-2.4-7.5
Product Details for Ziton Weatherproof wall mount VAD, White body, red flash, W-2.4-7.5
The Ziton FAW355W is a white, general purpose, wall mounted LED beacon for fire alarm applications. It features a special deep base containing all wiring connections that allows easy removal/placement of the device. With an EN54-23 approved coverage pattern of W-2.4-7.5, each FAW355W may be mounted up to up to 2.4m high and cover a square room of 7.5 x 7.5m with a single device.
Allows faster installation and maintenance due to an innovative mounting base. Dispensing with the need for locking screws, these beacons use TimeSaver™ bases from the 630 series detectors. Heads are locked onto the base with a “twist and click” action, allowing fitting or removal at any time as the base is the only component that needs to be wired. The cabling requirement is reduced so commissioning time and costs are naturally reduced as well.
A specially designed lens emits a uniform light output over the specified coverage area. The flash rate of the beacon may be adjusted during installation, with a selection of 0.5Hz or 1Hz.
The mechanism for locking the device to the base may be activated, if required. Once activated, a special tool is required to remove the beacon from the base.
Key Features of the FAW355W |
|---|
|
> White body, red flash
> Automatic synchronisation > Anti-Tamper locking mechanism > Deep mounting base > Wiring directly to base > Flash rate selectable > IP65 Ingress protection rating |
| Brand | Ziton |
|---|---|
| Manufacturer Part No. | FAW355W |
FAQ’s for Ziton Weatherproof wall mount VAD, White body, red flash, W-2.4-7.5
Product Specification for Ziton Weatherproof wall mount VAD, White body, red flash, W-2.4-7.5
| Code: | FAW355W |
| Description: | Ziton Conventional VAD, Deep Base, Wall Mount - Red Flash |
| Dimensions: | Dia:100 x D:104mm |
| Operating voltage: | 17 to 60 VDC |
| VID: | 0.5 or 1 Hz 30 or 60 flashes/min |
| Operating temperature: | -25 to +70°C |
| Relative humidity: | 5 to 95% non-condensing |
| IP rating: | IP65, indoor, outdoor |
| Operation: | Continuous |
| Current consumption: | 20mA @ 0.5 Hz / 40mA @ 1 Hz |
| Flash rate: | 0.5Hz or 1Hz |
| Automatic synchronisation: | Phased start |
| Line monitoring input: | Polarised input |
| Housing: | High impact polycarbonate |
| Flash colour: | Red |
| Regulatory: | EN54-23 certified Light coverage: W-2.4-7.5 Mounting position: Wall Mounting height: up to 2.4m Floor coverage: up to 7.5 x 7.5 m |
| Housing colour: | White |
| Weight: | 250g |
