Ziton Surface mount door holder - 400N, with release button
Product Details for Ziton Surface mount door holder - 400N, with release button
The Ziton FE230 is a surface mount door holder, in a Bayblend housing, which offers a 400 N holding force and a release button. Cable entry is possible from the back or from the sides and the release button can be located at the top, or one of the sides.
The magnet is constructed with a pressed coil and anti-remanence pin, giving it a protection of IP54. The protection diodes are integrated.
The plastic housing is manufactured from Bayblend and contains 30% PA6 glass fibre, which makes it much stronger than standard ABS. Bayblend offers high heat resistance, high impact and notched impact strength, high stiffness and dimensional stability.
For ease of installation, the door holder comes with electrical screw terminals.
The housing is pre-drilled for rapid mounting. The door holder is supplied complete with a keeper plate, which offers angular adjustment.
The release button can be positioned in 3 different locations: top, left or right. Cable entry can be positioned in 4 different locations: back, top, left or right.
The FE230 is fully approved according to EN1155.
Key Features of the FE230 |
|---|
|
> Low power - 1.6 W
> 400 N holding force > Anti-remanent ejector > Spark suppression diode and reverse polarity protection > Release button > EN1155 approved > Keeper plate included |
| Brand | Ziton |
|---|---|
| Manufacturer Part No. | FE230 |
FAQ’s for Ziton Surface mount door holder - 400N, with release button
Product Specification for Ziton Surface mount door holder - 400N, with release button
| Code: | FE230 |
| Description: | Ziton Door holder, surface mount, 400N, with release button |
| Compatible products: | FE225-150: Universal Bracket Wall or Floor Mounting - 150 mm FE225-300: Universal Bracket Wall or Floor Mounting - 300 mm FE290: Door Holder, Surface Mount, 400N, Mains Powered FE527: Standard Anchorplate for FE500 Series Doormagnets FE529: Swivel Anchorplate for FE500 Series Doormagnets |
| Dimensions: | W:85mm x H:110mm x D:38mm |
| Holding force N (Newton): | 400 |
| Release button: | Yes |
| Spark suppression diode: | Yes |
| Reverse polarity protection: | Yes |
| Power supply type: | 24 VDC |
| Power consumption: | 1.6W |
| Duty cycle: | 100% |
| IP rating: | IP54 (magnet) IP42 (connection) |
| Regulatory: | EN1155 standard |
