This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
ADLCU-2
£665.65 £554.71
Kidde Alarmline II Digital LHD Dual Zone Location Control unit
The Kidde AlarmLine II digital location control unit is a dual zone module for monitoring up to 2 zones of AlarmLine Digital Linear Heat Detection Cable. If an overheat or fire situation triggers either zone of the digital cable the unit automatically calculates and displays the distance along the cable, in feet and metres, to the alarm point. The 2 zones can operate independently of each other, or in interlock mode. A separate alarm and normally conducting fault output are provided for each zone. The unit is intended to be installed between the AlarmLine digital linear heat detection cable and a conventional or addressable fire alarm control panel.
It has power, fault and alarm indicators, as well as free outputs for fault and alarm, corresponding to each zone. It may also be connected to an industrial process control system using the 2-wire RS-485 Modbus RTU output. The unit supports the use of a interconnecting cable (leader cable) in between the control unit and the linear heat detection cable. The interconnecting cable is used in applications where the control unit is not located in the detection zone. The interconnecting cable is then used to connect the control unit in one location, with the linear heat detection cable in the protected area. The interconnecting cable is available in 100m lengths, under the product code AAI-0100.
Key Features |
---|
> Dual Zone - used as Independent or Interlock > Designed for Alarmline II digital linear heat cable > Easy to install > IP65 > RoHS Compliant and CE Certified > Modbus support > 3km of cable supported per zone > Wide supply voltage > Low current consumption |
Manufacturer | Kidde Alarmline |
---|---|
MPN | ADLCU-2 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Code: | ADLCU-2 |
Description: | Kidde AlarmLine II - Dual zone digital location control unit |
Dimensions: | W:120mm x H:180mm x D:60.5mm |
Status indication: | 5 x LEDs (1 x power-green, 2 x alarm-red, 2 x fault-orange) |
User interface: | 2-line, 16-character backlit display |
Connectivity: | Modbus (two-wire RS-485 RTU) |
Internal buzzer: | 2.4 kHz pulsed signal |
Operating voltage: | 12 - 36 VDC |
Current consumption: | Standby < 7mA at 24 VDC Alarm < 40 mA at 24 VDC |
Terminals: | Cable size - 0.08 to 4 mm² (28 to 11 AWG) |
Zone length: | 1 m (3.28 ft) to 3000 m (10 000 ft) |
No. of zone inputs: | 2 |
EOL resistor: | 1 kΩ |
Output quantity: | 2 x Alarm (voltage free relay contacts) 2 x Fault (opto-isolated phototransistor) |
Material (body): | Polycarbonate |
Mounting type: | Clip on |
Environment: | Operating temperature: -20°C to +50°C IP65, Indoor |
Cable entries: | 2 x M16 and 4 x M12 |
Colour: | Grey (RAL 7035) |
Regulatory: | CE, UL certified |