This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Kentec Sigma XT Ancillary PCB c/w Integral 2.6A PSU, Boxed - ZXT Enclosure Style (K03260XM2)
SKU
K03260XM2
£295.61 £246.34
Kentec K03260XM2 Sigma XT Ancillary PCB integral with 2.6A PSU, boxed - Sigma ZXT enclosure style
The Kentec K03260XM2 Sigma XT is a boxed Extinguishant Ancillary PCB with 2.6A PSU. It provides volt free relay outputs for fire and extinguishing system status. Surface mount. Sigma ZXT enclosure style.
The Sigma XT Ancillary Board is compatible with all Sigma XT control panels which have operating software version SIGXT_11A.HEX or above.
The board provides volt free normally open contacts allowing control of subsystems and plant remotely from the main panel over a two wire data bus.
Mains powered, boxed Ancillary boards require only a two core data cable from the main control panel. 24V DC versions require an additional two cores for power either from the main panel or from another 24V DC source.
Up to 7 Ancillary boards can be connected to a control panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres.
A mixture of status units and Ancillary boards, up to a maximum of 7 of each type, can be connected to the serial data bus.
| Key Features |
|---|
| > Expansion board for Sigma extinguishing panels > Boxed with integral 2.6A PSU universal AC input voltage power supply > Provides relay outputs for signalling of extinguishing system status > Serial communication with panel > 2-wire serial connection > Up to 7 ancillary boards supported on a single panel per system > Volt free relay outputs for fire and extinguishing system status > Relay operated LED indicators > Compatible with all Sigma XT control panels with operating software SIGXT_11A.HEX or above > Requires 20-30V DC supply > Space for 2 x 12v 7Ah SLA batteries > 10 x 1A @ 30V DC relay outputs - Z1 Fire, Z2 Fire, Z3 Fire, Man Mode, Disable, Release, Activated, Hold, Extract, Manual Release > Surface mount M2 Sigma ZXT style enclosure, box size W:368mm x H:324mm x D:96mm |
| Manufacturer | Kentec Electronics |
|---|---|
| MPN | K03260XM2 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Product Code: | K03260XM2 |
| Product Dimensions: | W:368mm x H:324mm x D:96mm (Sigma ZXT style enclosure, surface mount) |
| Construction: | 1.2mm mild sheet steel |
| IP Rating: | IP30 |
| Finish: | Epoxy powder coated |
| Colour: | lid & box BS 00 A 05 grey - fine texture |
| Weight: | 1kg |
| Supply voltage: | Integral 2.6A PSU universal AC input voltage power supply |
| Battery size: | Space in enclosure for 2 x 12V 7Ah SLA batteries |
| Cable capacity: | 2.5mm2 per terminal |
| Operating temperature: | -5oC to +50oC <95% humidity (non condensing) |
More from Kentec Electronics
