This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
CHQ-MRC2/DIN(SCI)
£52.20 £43.50
Hochiki CHQ-MRC2/DIN(SCI) Mains Relay Controller DIN Enclosure with SCI
- Buy 10 for £51.40 £42.83 each and save 2%
- Buy 20 for £50.59 £42.16 each and save 3%
- Buy 50 for £49.79 £41.49 each and save 5%
The Hochiki CHQ-MRC/DIN(SCI) is a Single Input/Output Module, which provides a single, mains-rated relay output for the control of such devices as dampers, extractors or plant and equipment shutdown. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. The unit is supplied as a DIN Rail mountable version but is also available as a boxed module. Both models feature an integral short-circuit isolator. The CHQ-MRC/DIN(SCI) utilises simple DIL switches for reliable addressing.
Key Features |
---|
> Loop powered > Single loop address > Single mains rated relay contact > Relay Contact Rated at 250 V ac 5 A (resistive load only) & 48 V dc 2 A (resistive load only) > Auxiliary monitored input > DIN rail version available > Both models feature an integral short-circuit isolator |
Manufacturer | Hochiki |
---|---|
MPN | CHQ-MRC2/DIN(SCI) |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Description | Hochiki Analogue Mains Relay Controller, DIN module |
Product Code | CHQ-MRC2/DIN(SCI) |
Dimensions (mm): | L119 x H108 x D24 |
Operating voltage: | 17 - 41 VDC |
Low power mode (typ): | 100 μA |
Quiescent current (typ): | 300 μA |
Current consumption: | 22 mA ± 20 % (polling) |
Current in short circuit: | 8 mA |
Maximum short circuit current: | 1 A |
Relay contact rating* **: | 48 VDC max, 2 A (resistive load), 250 VAC max, 5 A (resistive load) – For mains ac switching, the Control Panel must be compliant with Low Voltage Directive for SELV circuits |
Input EOL resistor: | 10 kΩ, ±5%, 0.25 W |
Input threshold level: | ON=470 Ω, Short cct <50 Ω, Open cct >100 KΩ |
Operating temperature range: | -10 °C to + 50 °C |
Storage temperature range: | -30°C to +60°C |
Max. humidity: | 95% RH non-condensing (at 40 °C) |
Colour, Case material: | CHQ Module & CHQ-BACKBOX White ABS, DIN Module Green ABS, Module Lid Semi-Opaque Black ABS as standard (white version – CHQ-LID(WHT) also available) |
Weight: | 145g |
* Fire alarm control panel compatibility required for these products. ** No fuses are fitted on this device. The relay output circuit must therefore be protected by a suitable over-current protection device to prevent excessive current through the relay contacts. Refer to the relay contact specification in the attached datasheet. |