This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Hochiki CHQ-DZM(SCI)-IS Intrinsically Safe Compatible Dual Zone Monitor with SCI
SKU
CHQ-DZM(SCI)-IS
£179.87 £149.89
Hochiki CHQ-DZM(SCI)-IS Intrinsically Safe Compatible Dual Zone Monitor with SCI
The Hochiki CHQ-DZM(SCI)-IS is Dual Zone Module which is fully compatible with Hochiki's ESP analogue addressable protocol and I.S. equipment. It is supplied as an OEM version (as illustrated) which can be fitted within an IP67 rated enclosure. The unit is also available as a DIN Rail mountable module; both models feature an integral short-circuit isolator. Addressing is achieved via simple DIL switches.
The device is designed to allow up to 40 (20 per zone) Conventional I.S. CDX Range detectors (SLR-E-IS or DCD-1E-IS) in the hazardous area to be interfaced to Hochiki's ESP analogue addressable system within the safe area.
(Please note that this module should only be installed in the safe area).
The conventional zones on the CHQ-DZM(SCI)-IS do not support any line continuity options, therefore if Call Points are being interfaced they should be wired at the beginning of the zone.
An appropriate barrier must be used.
| Key Features |
|---|
| > Single loop address > Requires an auxiliary 24 VDC supply > Supports two independent zones of Hochiki I.S. Conventional Detectors > Both zones fully monitored for short/open-circuit > DIN rail version available > Both models feature an integral short-circuit isolator |
| Manufacturer | Hochiki |
|---|---|
| MPN | CHQ-DZM(SCI)-IS |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Description | Hochiki Analogue Dual Zone Monitor |
| Product Code | CHQ-DZM(SCI)-IS |
| Dimensions (mm): | (with lid ) L 157 x W 127 x D 35 |
| Operating voltage: | 17 - 41 VDC |
| Low power mode (typ): | 110 μA |
| Quiescent current (typ): | 330 μA |
| Current consumption (external): | (Quiescent) 2 mA, (Alarm) 70 mA (Both zones in fire) |
| Capacitance on zone: | 0.3 μF max. |
| Resistance on zone: | 50 Ω max. |
| Operating temperature range: | -10 °C to + 50 °C |
| Storage temperature range: | -30°C to +60°C |
| E.O.L. device options: | 10 KΩ resistor (supplied with unit) |
| Zone output voltage: | 15.3 - 17.1 V |
| Output rating*: | 24 VDC 8.5 mA |
| Colour, Case material: | Ivory White / ABS |
| Weight: | 682g |
| * Output Rating (24V 8.5mA) is for remote indication outputs | |
More from Hochiki
