This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
DI-9319E
£46.43 £38.69
GST Intelligent Addr. Zone Monitor Unit needs 24VDC.
The GST DI-9319E is an intelligent, digital zone monitoring unit. It communicates with the fire alarm control panel (CIE) via 2 wires using a digital protocol. Designed to connect with a zone of conventional detectors which is translated into one address on the addressable loop. Up to 30 conventional detectors (DC-9000E series or similar) may be connected to the zone. When any device in the zone reports an alarm, the DI-9319E transmits the signal to the CIE generating a standard fire alarm and processes the event accordingly, as for any addressable fire alarm device. A potential free change-over relay on the DI-9319E activates automatically when an alarm is detected from the zone.
Key Features |
---|
> Fully supervises one conventional fire detection zone > External supply supervision > Potential free, changeover relay output following the zone activation status automatically > Electronically addressed > LED status indications for alarm and fault > Din-Rail or surface mount support > Ground fault detection support > EN 54-18 approved and LPCB marked |
Manufacturer | GST |
---|---|
MPN | DI-9319E |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Code: | DI-9319E |
Description: | GST S9000 Innovation intelligent zone monitor module |
Dimensions: | 85.3 x 78.0 x 33.0 mm |
Status indication: | LEDs |
Compatibility: | GST DI-9000E and DC-9000E systems |
Addressing method: | Electronic |
No. of addresses: | 1 |
Power supply type: | 24 VDC |
Operating voltage: | Loop Power 24 VDC (16 to 28 VDC) External Power 24 VDC (20 to 28 VDC) |
Current consumption: | Loop Power ≤ 0.5 mA (Standby) ≤ 0.5 mA (Activated) External Power ≤ 10 mA (Standby) ≤ 60 mA (Activated) |
Input: | Quantity: 1 Type / rating: Supervised conventional zone, 24 VDC nominal States: Active, Normal, Open, Short Supervisory voltage: 24 VDC Termination resistor: 4k7Ω |
Output: | Quantity: 1 Type / rating: Potential free changeover (Form C), 2 A @ 24 VDC |
Vandal proof: | No |
Material: | ABS |
Cable specification: | ≥1.0 mm² |
Colour: | White (RAL 9016) |
Mounting type: | DIN-rail, Surface mount |
Operating temperature: | -10 to +55°C |
Relative humidity: | ≤95%, non-condensing |
IP Rating: | IP20, Indoor |
Regulatory: | CE, REACH, RoHS, WEEE compliant CPR, EN54-18, LPCB marked / certified |