Global Fire Sense-Ware UV Flame Detector (GFE-SWR-UV)
SKU
GFE-SWR-UV
£1,576.15
£1,313.46
Global Fire Sense-Ware UV Flame Detector (GFE-SWR-UV)
Available to Order
This item is not currently in stock at our main warehouse, but it is available to backorder or may be sent directly from the manufacturer. Contact us for lead time.
Product Details for Global Fire Sense-Ware UV Flame Detector (GFE-SWR-UV)
The Global Fire GFE-SWR-UV flame detector is suitable for indoor applications, such as fume hoods and hydrogen storages. Because of its non-corrosive housing it is suitable for indoor industrial areas where corrosion may occur. UV light is emitted in practically every fire, both hydrocarbon and non-hydrocarbon fires.
The GFE-SWR flame detector range from Global Fire Equipment utilises a microprocessor for sophisticated electronic signal analysis. Its advanced discrimination technology and rugged construction makes it suitable for almost all installations scenarios.
Key Features of the GFE-SWR-UV |
|---|
|
> Suitable for heavy and light Hydrocarbons such as Gasoline, Diesel, Methanol and Ethanol
> Resistant to artificial and sunlight > Suitable for indoor and outdoor applications > GRP IP65 housing > Relay output for Alarm and Fault conditions > CPR/EN54-10 certified > ATEX zone 2/22 certified > FM3260 & 3611 Approvals > Rugged sensors make the detector suitable for virtually all fire types > Sophisticated software enhances the reliability and availability of the detector > Design of the housing and the swivel mount avoid mounting errors with regards to grounding > Automatic Sensor Test (Built-in Self-Test) enhances the reliability and availability of the flame detector > Pressure Compensating Element avoids additional cost of maintenance caused by moisture build up and increases the life time |
| Brand | Global Fire Equipment |
|---|---|
| Manufacturer Part No. | GFE-SWR-UV |
| Primary Power Source | 24V DC |
| System Type | Conventional |
| Sensor Type | Ultraviolet (UV) |
| Detectable Medium | Flame |
| Warranty | 5 Years |
Write Your Own Review
FAQ’s for Global Fire Sense-Ware UV Flame Detector (GFE-SWR-UV)
No questions yet. Be the first to ask the question!
Product Specification for Global Fire Sense-Ware UV Flame Detector (GFE-SWR-UV)
| Product code: | GFE-SWR-UV |
| Dimensions: | 125 x 80 x 57mm |
| Power: |
12-24V DC (10-28V DC) |
| Current normal: |
25 mA at 24V DC |
| Current in alarm (24 DC): |
+/- 75 mA at 24V DC |
| Startup time: |
<10 sec |
| Alarm output setting: |
Selectable LEDs & relays latching / non latching, factory setting: latching |
| Relay outputs / alarm relay: |
De-energized during normal operation, no alarm, SPDT, 30V DC - 2A, 60W max |
| Relay outputs / fault relay: |
Energized during normal operation, no fault SPDT, 30V DC - 2A, 60W max |
| Current output: | Standard available 0-20 mA (stepped sinking, non-isolated) |
| Alarm response time: | <8 sec |
| Cone of vision: | 90o minimum |
| Housing: | Glass reinforced polyester (GRP), lid screw tightening torque 2nm minimum |
| Ingress protection: | IP65 |
| Operating temp: | -40oC to 70oC |
| Ambient temp: | ATEX and FM class 3611:-25oC to 70oC |
| Automatic & manual self-test: | Automatic sensor test (built-in self test) and manual self-test |
| Detection: | 17m (n-heptane; 33x33cm) 25m (alcohol; 50x50cm) |
| Colour: | Red and White |
| Cable gland: | M20 (cable conduit dia. 5.5-13mm, two steps 5.5-8mm and 8-13mm) |
| Pressure compensating element: | PCE (Pressure Compensating Element) avoids moisture build up in the detector housing, caused by pressure differences as a consequence of temperature fluctuations |
| Terminals: | Suitable for massive cores 0.5 to 1.5mm2 (24 to 16 AWG), tightening torque 0.4 Nm minimum |
| Weight: | 465g |
| (Optional) GFE-SWR-BKT material: | PA66; 316SS nuts and bolts |
| (Optional) GFE-SWR-BKT weight: | 280g |
More from Global Fire Equipment
