This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
1090-000
£162.24 £135.20
Fireray Anti-Condensation Prism Heater (White) (1090-000)
The Fireray® prism heater is designed to be used in environmental conditions where condensation affects the reflector of the optical beam smoke detectors. The heater will reduce the likelihood of condensation by maintaining the reflector at a higher temperature than the surrounding air. The heater pad is an efficient, ultra-slim heating pad which is fixed behind the mounting plate.
Condensation occurs when the surrounding air is at a higher temperature than the surface that it comes in contact with. As air contains water, typically in the form of vapour, this will deposit on the cooler surface thus forming condensation.
The Fireray® prism heater increases the temperature of the prism through the mounting plate thus maintaining the reflector at a higher temperature than the surrounding air. This reduces the likelihood of condensation forming on the reflective prisms which, in turn, reduces the potential for false alarms.
Key Features |
---|
> Ultra slim heating pad > Designed to prevent the build-up of condensation > For use in temperature controlled storage areas and cold environments > Optical beam smoke detector heaters also available > Prisms ordered separately |
Manufacturer | Fire Fighting Enterprises |
---|---|
MPN | 1090-000 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Code: | 1090-000 |
Description: | Fireray Prism Heater (White) |
Dimensions: | 284mm x 284mm |
Operating voltage: | 24V AC/DC |
Power Consumption @ 24V: | 20W |
Operating current @ 24V: | 0.8A (typical) |
Operating temperature: | -10 to +35ºC |
Recommended fuse rating: | 2A |
Connections: | 2 x 500mm PTFE flying leads |
Time taken to reach peak temp: | 30 min |
Average temp. increase of prism above ambient: | 10°C |
Weight: | 600g |