This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Nittan EV-MiniIP2 Mini Input Module with Isolator
SKU
EV-MiniIP2
£50.29 £41.91
Nittan EV-MiniIP2 Mini Input Module with Isolator
- Buy 10 for £49.90 £41.58 each and save 1%
- Buy 20 for £49.50 £41.25 each and save 2%
- Buy 40 for £49.10 £40.92 each and save 2%
The Nittan EV-Mini IP2 is a Single Input module, with integral –ve line Short circuit isolator compatible with Evolution analogue addressable system devices.
The module is compact and suitable for mounting within other equipment, such as Firebeam or Aspirating detectors. A remote LED output is provided for Input status indication.
Device address may be set using EV-AD2-EXT Hand held programmer.
The Short Circuit Isolator will protect the system, whilst allowing the device to continue communication from the opposite side. An indicating LED is provided and the isolator will selfreset when the fault clears.
Not compatible with Advanced MxPro4 (Mx4000) Panel. Please use Non-SCI model.
It is not possible to mix +ve and -ve isolator styles on a system.
The following resistors are required for Fault and Alarm monitoring:
- EOL = 10k Ohm
- Alarm = 470 / 680 Ohm
| Key Features |
|---|
| > Loop Powered > 1 x Class B Input > Integral -ve Isolator > Housing fits standard UK 1 Gang pattress box > Remote Indicator Output |
| Manufacturer | Nittan |
|---|---|
| MPN | EV-MiniIP2 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Operating loop voltage | 20 to 38 Vdc |
| Quiescent current | 690 µA |
| Alarm current | 3.3 mA |
| Current in short circuit | 15 mA |
| Input | 1 x Class B |
| Operating voltage (Zone) | 12 to 18 Vdc |
| Operating temperature | -10°C to +55°C |
| Storage temperature | -40°C to +80°C |
| Relative humidity | < RH 95% (Non-condensing) |
| Cable terminals | 0.75 to 2.5 mm2 |
| Material | PC/ABS |
| Weight | 40 g |
More from Nittan
