Essential Cookies
This website only uses essential cookies for the functionality of our cart and checkout process. Read our cookie policy
Eaton Cooper Intelligent Addressable Photo-Thermal Multisensor (CAPT340)
SKU
400004FIRE-0004X
£43.25 £36.04
Eaton Cooper Intelligent Addressable Photo-Thermal Multisensor (CAPT340)
- Buy 10 for £42.58 £35.48 each and save 2%
Product Details for Eaton Cooper Intelligent Addressable Photo-Thermal Multisensor (CAPT340)
The Eaton CAPT340 photo-thermal sensor will respond quickly to fast clean burning fires yet maintain the advantage of optical sensors when detecting smouldering fires. The thermal enhancement of this sensor allows a higher alarm threshold which provides a greater rejection of false alarms. The sensor will also raise an alarm at temperatures exceeding 60ºC.
This range of intelligent addressable sensors have been specifically designed to operate with Eaton’s intelligent addressable fire systems.
All sensors are third party approved to the relevant section of EN54 (part 7 for smoke detectors, part 5 for heat detectors and part 17 for short circuit isolators).
Key Features of the 400004FIRE-0004X |
|---|
| > Soft addressed > Integral short circuit isolator > Single address > 360° visibility LED using lightpipe technology > Drift compensation > Aesthetically pleasing > Quick and simple to install > Wide viewing angle for increased LED visibility > Common mounting base > Positive “lock” indication > Discreet design for any decor > Easy to maintain/service |
| Brand | Eaton |
|---|---|
| Manufacturer Part No. | CAPT340 |
| Primary Power Source | 24V DC |
| System Type | Addressable |
| Protocol Compatibility | Eaton |
| Sensor Type | Combined Optical and Thermistor |
| Detectable Medium | Smoke, Heat |
| Colour | White |
| Warranty | 3 Years |
Write Your Own Review
FAQ’s for Eaton Cooper Intelligent Addressable Photo-Thermal Multisensor (CAPT340)
No questions yet. Be the first to ask the question!
Product Specification for Eaton Cooper Intelligent Addressable Photo-Thermal Multisensor (CAPT340)
| Product: | Eaton Addressable Photo-Thermal Heat Sensor |
| Catalogue no.: | 400004FIRE-0004X |
| Dimensions: | Dia:100mm x D:44mm |
| Current supply primary: | Battery / accumulator |
| Voltage: | 18 - 30V dc |
| Alarm current: | 5mA max. |
| Integrated function: | Networkable via cable, VdS accepted |
| Operating principle: | Combination |
| Back-up battery included: | None |
| Standby current: | 220 |
| System wiring: | 1.5mm |
| System typology: | Addressable, soft addressing |
| Mounting method: | Surface, Ceiling in open area. Suitable for duct mounting |
| Type of test/pause button: | Not applicable |
| Cable entry: | Rear |
| Max. no. networkable: | 200 |
| Operating temperature: | -10oC to +50oC (95% max humidity, non condensing) |
| Response temperature: | 60oC |
| Construction: | ABS |
| Colour: | White (akin RAL9003) |
| IP rating: | IP40 |
| EN Certification standards: | EN54 Pt17 (Short Circuit Isolator) EN54 Pt5 (Heat & Point Detectors) EN54 Pt7 (Smoke Detector) |
| Warranty: | 3 years |
| Weight: | 0.076 kg |
More from Eaton
