C-TEC CAST Addressable Input Output Module (CA730)
SKU
CA730
£47.70
£39.75
C-TEC CAST Addressable Input Output Module (CA730)
- Buy 10 for £45.88 £38.23 each and save 4%
Available to Order
This item is not currently in stock at our main warehouse, but it is available to backorder or may be sent directly from the manufacturer. Contact us for lead time.
Product Details for C-TEC CAST Addressable Input Output Module (CA730)
The C-TEC CA730 is an addressable CAST input output module, compatible with C-TEC's range of CAST protocol fire detection panels and field devices.
Key Features of the CA730 |
|---|
|
> LPCB certified to EN54-17 & 18 and Kiwa Telefication certified to EN54-13.
> Incorporates the functions of a switch monitor, zone monitor and output unit. > Can be configured to monitor any combination of:- • Up to 20 conventional detectors & 10 MCPs • Any normally open switch with an EOL resistor fitted. • A simple normally open or closed switch (non-fault monitored). > Onboard short-circuit loop isolator. > 5.5mA typical alarm current (1.3mA typical quiescent current) @ 22-40V DC. > Indicators for Loop polling, input faults and relay status. > Can switch 1A@30V DC (or 0.3A@125V AC) > Includes volt free changeover contacts that can be used to trigger rollershutter doors, gas shut-off valves, smoke vents, etc. > Mountable on a C-TEC NCP-26 surface box or a standard UK 25mm double gang back box (not supplied). |
| Brand | C-TEC |
|---|---|
| Manufacturer Part No. | CA730 |
| Primary Power Source | 24V DC |
| System Type | Addressable |
| Protocol Compatibility | C-TEC CAST |
| Warranty | 1 Year |
Write Your Own Review
FAQ’s for C-TEC CAST Addressable Input Output Module (CA730)
No questions yet. Be the first to ask the question!
Product Specification for C-TEC CAST Addressable Input Output Module (CA730)
| Approvals/certifications | LPCB certified to EN54-17 & 18 and Kiwa Telefication certified to EN54-13. |
| Compatibility | Compatible with C-TEC's XFP/ZFP CAST Addressable Fire Panels. |
| Application/operation | Incorporates the functions of a switch monitor, zone monitor and output unit in one device. |
| Supply/operating voltage | 22 to 40V DC. |
| Quiescent current | 1.3mA typical. |
| Activation current | 5.5mA @ 22 to 40V DC. |
| Auxiliary relays | One volt-free single pole changeover relay rated at 1A @ 30V DC (or 0.3A @ 12 V AC). Non-monitored. Clean contact. |
| Auxiliary inputs | One monitored input that can be set to operate as a single zone monitor to support up to 20 ActiV detectors and 10 MCPs or (2) a monitored normally-open switch, triggered by a 470R. |
| Indicators | Active (Lit Red): relay activated; monitored zone triggered or monitored switch closed; Polling (Flashing Red): communication check with the panel; Input Fault (Lit Yellow): fault detected |
| Connections | Six 45º screw-type connectors that can take 0.5-2.5mm2 cable: +Ve & -Ve Loop In; +Ve & -Ve Loop Out; Zone +Ve & -V. Also includes N/O, N/C & C relay connections. |
| Product dimensions (mm) | 147 W x 87H x 22 D mm. Can be mounted on a standard 25mm UK flush or surface double gang back box. |
| Construction & finish | ABS Polycarbonate plate with a 200 micron two-tone grey velvet polyester label with red and white detailing. |
| IP Rating | IP40 when correctly installed. |
| Weight | 122g. |
| Operating conditions/temperature | -10ºC to +55ºC. |
More from C-TEC
