C-TEC 5 Series 24V 3A EN54-4 Encased Power Supply PCB Only (BF562-3/E)
SKU
BF562-3/E
£92.56
£77.13
C-TEC 5 Series 24V 3A EN54-4 Encased Switch Mode Power Supply PCB Only (BF562-3/E)
- Buy 10 for £88.99 £74.16 each and save 4%
Available to Order
This item is not currently in stock at our main warehouse, but it is available to backorder or may be sent directly from the manufacturer. Contact us for lead time.
Product Details for C-TEC 5 Series 24V 3A EN54-4 Encased Power Supply PCB Only (BF562-3/E)
The C-TEC BF562-3/E is a Mains to regulated DC PSU providing 3 A @ 24 Vdc nominal, designed for use with fire and security systems. Combining the functions of a PSU, battery charging unit and battery monitoring unit, it is designed and intended for use in OEM equipment. It is supplied with a protective ‘live parts’ cover.
The system designer must assure the compatibility to all relevant standards for the PSU within the installed enclosure. For full compliance with all relevant standards and directives, the PSU must be installed inside a suitable enclosure.
Key Features of the BF562-3/E |
|---|
|
> A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements
> Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410). > Includes the same electronics as our BF562-3 LPCB/VDS certified EN54-4/A2 boxed 24V 3A PSU. > Metal base plate facilitates straightforward mounting inside third-party OEM enclosures. > Includes a single-pole volt-free changeover relay that switches for any fault condition. > Includes a fault type & hazardous voltages present LED. > Two selectable battery charge currents. > Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*. > Mains fail simulation mode. > Improved on-board temperature sensor with optional remote sensor. > Electronic functions comply with EN50131-6 grades 1-4 for security applications. |
| Brand | C-TEC |
|---|---|
| Manufacturer Part No. | BF562-3/E |
Write Your Own Review
FAQ’s for C-TEC 5 Series 24V 3A EN54-4 Encased Power Supply PCB Only (BF562-3/E)
No questions yet. Be the first to ask the question!
Product Specification for C-TEC 5 Series 24V 3A EN54-4 Encased Power Supply PCB Only (BF562-3/E)
| Approvals/certifications | Includes the same electronics as our EN54-4/A2 certified BF562-3 PSU |
| Compatibility | *** Full compliance with all relevant standards must be checked by the responsible person with the caged PSU installed in a suitable enclosure *** |
| Application/operation | An encased Mains to regulated DC switch-mode/digital hybrid power supply providing 3A @ 24V DC. It includes a single pole volt-free changeover relay that switches for any fault condition. User customisable via a BF423 Configurator. |
| Mains supply | 230V 50/60Hz. |
| Mains rated current | 800mA r.m.s. |
| Total output current limited to | 3A (Max. output current). |
| Output | I max.a: 2.6A or 2A selectable. A load greater than I max.a will temporarily reduce batt. charging. I.max.b: 3A, charging turned off via CONN6. Output is also customisable via a BF423 Configurator*. |
| Battery charge capacity | 2.5Ah up to 17Ah (battery charged to 80% capacity in 24hrs). Output is customisable via a BF423 Configurator to suit different manufacturers' batteries*. |
| Max battery size and type | Up to 17Ah VRLA dependent on the size of the enclosure the BF562-3/E is mounted in. |
| Indicators | Supply Present (Green); General Fault (Amber); Auxiliary Fault (Amber); Hazardous Voltages Present (Red). |
| Connections | Mains Input (CONN1); Supply Output (CONN3); Battery Input (CONN3); Fault Relay (CONN4); Charge Off Input (CONN5). Battery Charge Current Link (PLK1); Battery Monitoring On/Off Link (PLK2); High Temp. Output (PL2). |
| Expansion connections | A remote thermistor can be connected via PL3 terminals. |
| Product dimensions (mm) | 143mm H x 173mm W x 66mm D. |
| Construction & finish | Zintec base, polycarbonate cover. |
| IP Rating | Dependent on mounting enclosure. |
| Weight | 665g (without batteries). |
| Operating conditions/temperature | -5ºC to +40ºC. Max relative humidity: 95%. |
| Notes | *Parameters configurable via a BF423 configurator are: Float voltage temp. compensation; Batt. charge rate (mA); Batt. impedance; Configurable Input/Output settings. |
More from C-TEC
