Product Details for Apollo Soteria Dimension IR Optical Smoke Detector (Black) (FL5100-660APO)
The Apollo Soteria Dimension Optical Smoke Detector (Black) has an innovative design which differs from standard fire detectors, having no chamber and being flush mounted. A new optical sensing technology is used to detect smoke particles outside the detector housing. A combination of Infra-Red (IR) LEDs and photo-diodes identify smoke particles, detected just below the detector housing and initiates an alarm.
Operation
The Soteria Dimension Optical Detector contains two daylight filtered photo-diodes and three IR emitters in different positions and angles. Different combinations of these are used to act as smoke sensors and proximity sensors to measure the smoke level at the detector in the event of a fire and to detect any physical obstructions.
As this detector is chamberless, an IR LED emits light outside the detector. The light is scattered by smoke back towards the detector and registered by a photo-diode.
A pair of microprocessors control these sensors, setting the sensor timings and using a digital phase-sensitive detection algorithm to reduce noise and the effect of background light. They then provide digital filtering for transient rejection, compensation for drift and temperature and ultimately make an alarm decision.
The mode of operation may be selected at the fire control panel.
Key Features of the FL5100-660APO |
|---|
|
> Flush mounted
> Utilises digital CoreProtocol communications > Compatible with Discovery and XP95 systems (not all features may be available when connected to an XP95/Discovery panel) > Integrated switchable isolator as standard > 8-way DIL switch addressing > Drift compensation > FasTest® for quicker testing > Tricoloured LED status indicator > Polycarbonate moulding for colour stability and strength > Comprehensively tested to exceed EN 54-7 and EN 54-17 standards > Locking mechanism (grub screw) |
| Brand | Apollo Fire Detectors |
|---|---|
| Manufacturer Part No. | FL5100-660APO |
| Product Series | Soteria |
| Primary Power Source | 24V DC |
| System Type | Addressable |
| Protocol Compatibility | Apollo XP95, Apollo Discovery, Apollo CoreProtocol |
| Sensor Type | Optical |
| Detectable Medium | Smoke |
| Colour | Black |
| Warranty | 5 Years |
FAQ’s for Apollo Soteria Dimension IR Optical Smoke Detector (Black) (FL5100-660APO)
Product Specification for Apollo Soteria Dimension IR Optical Smoke Detector (Black) (FL5100-660APO)
| Code: | FL5100-660APO |
| Description: | Soteria Dimension Optical Smoke Detector |
| Applications: | Bedrooms, Cafes, Escape routes, hotels, restaurants, retain, B&Bs/guest houses, offices, university campuses |
| Colour: |
Black (Gloss) |
| Fire type: | Slow burning, smouldering fires |
| Sensor configuration: | Chamber with surface-mount infrared emmiter and prism. Solid state integrated photo-diode and amplifier |
| Materials: | Housing: Polycarbonate Terminals: Tin plated stainless steel |
| Product diameter: |
100mm (3.94") |
| Detection principle: | Photo-electric scattering |
| Standards: | EN54-7, EN54-17 |
| Approvals: | LPCB, CPR |
| Analogue value: | 23 (nominal);0 (-tolerance);4(+tolerance) |
| Alarm level analogue value: | 55 |
| Chamber type: | PureLight |
| Protocol voltage: | 5V (min.) to 13V (max.) peak to peak |
| Supply voltage: | 17V - 35V dc |
| Power-up surge current: | 0.56mA |
| Status indicator: | Alarm - Red Fault - Flashing yellow Isolate - Yellow Poll - Green |
| Sampling frequency: | Once per second |
| Quiescent current: | 350μA |
| Quiescent current tested at: | 24V dc |
| Terminal functions: | L2: +L2 Loop in & out positive L1 in:-L1 in Loop (isolated) negative L1 out: +L1 out +R: +R Remote indicator positive connection -R: -R Remote indicator negative connection |
| Polarity: | L1 & L2 are polarity sensitive |
| Humidity: | 0 - 95% (no condensation or icing) |
| Operating temperature: | -40 to 70°C |
| IP Rating: | IP44 |
| Warranty: | 10 year |
| Weight: | 146g |