This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Apollo REACH Wireless Input Module (RW1700-051APO)
SKU
RW1700-051APO
£202.30 £168.58
The Apollo REACH RW1700-051APO REACH Wireless Input Module is a wireless analogue addressable interface with single fully monitored input circuit which allows simple integration of third-party equipment with the fire system.
- Buy 10 for £200.68 £167.23 each and save 1%
The Apollo REACH RW1700-051APO REACH Wireless Input Module is a wireless analogue addressable interface with single fully monitored input circuit which allows simple integration of third-party equipment with the fire system.
Operating Principles
The RW1700-051APO REACH Wireless Input module works on an ON/OFF logic and does not rely on any special and/ or intelligent communication protocol for its operation (i.e conventional call-points). See table 2 for connection requirements.
Status LED
When one or more faults are present in the system they are shown on the LCD and the fault LED is switched on yellow. LCD is ON only when the tamper switch is not activated (cover open) regardless of the configuration of the translator tamper fault.
Device Addressing
Device addressing is handled by the REACH Wireless Loop-Interface device (RW1700-030APO).
Devices are soft-addressed automatically when pairing with the Loop Interface and can be changed manually. Hard-addressing using Apollo XPERT cards are not supported.
Communication
REACH Wireless Devices use ‘radio-frequency’ wireless communication to connect to the Loop-Interface.
The Loop-Interface (RW1700-030APO) translates the wireless communication into wired Apollo protocol communication, with each device addressable individually by the fire panel. See datasheets for the Loop-Interface for more information.
Tamper detection
REACH Wireless devices contain an anti-tamper mechanism. In the event of removal from its base, it sends a tamper
detection message to the Loop-Interface.
Tampering detection is not signalled visually by the device LED.
| Key Features |
|---|
| > Input circuits are fully supervised for alarm and fault conditions > Bi-directional wireless communication > Dual channel redundancy > Five year product warranty |
| Manufacturer | Apollo Fire Detectors |
|---|---|
| MPN | RW1700-051APO |
| Primary Power Source | Longlife Batteries (Lithium) |
| System Type | Wireless |
| Protocol Compatibility | Apollo XP95, Apollo Discovery, Apollo CoreProtocol |
| Colour | White |
| Warranty | 5 Years |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Part No | RW1700-051APO |
| Communication Range between Loop-Interface and Devices | 100m (in open space) |
| Field Device Radio Frequency Channel Pairs | 22 pairs |
| Radiated Power | 14 dBm (25 mW) |
| Battery Type | 2x VARTA CR123A Lithium 3 V, 1250mAh typical |
| Battery Lifespan | Five years in normal operation with good signal strength (no dropped messages) |
| Operating Temperature | -10°C to +55°C |
| Maximum Relative Humidity (non-condensing) | 95% |
| IP Rating | IP 65 |
| Standards and approvals | EN54-18, EN54-25 |
| Dimensions | 136 mm diameter x 96 mm height x 57mm depth |
| Weight (including base and batteries) | 270 g |
| Digital Communication | Apollo protocol compatibility is handled via the Loop-Interface device, RW1700-030APO. |
More from Apollo Fire Detectors
