This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
AirSense Replacement Stratos Micra 100 detector
SKU
9-30740
£1,425.34 £1,187.78
AirSense Replacement Stratos Micra 100 detector
Detector only, designed to fit into a Docking Station (not supplied)
The Stratos Micra 100 is designed to provide very high sensitivity smoke detection in a small package. ClassiFire Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex setup. This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.
| Key Features |
|---|
| > Small low cost aspirating smoke detector for easy and discreet installation > High sensitivity provided by laser based forward light scatter for reliable early warning > Single sampling pipe up to 100m in length (still air) > Unique ClassiFire® Perceptive Artificial Intelligence system that dynamically adjusts the detector’s operating parameters, allowing for day to day changes in the protected environment and dust separation system contamination > Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination system > RS485 communications built in as standard for networking and remote communications > CPR, LPCB, VdS, NF & CSIRO approved |
| Manufacturer | AirSense |
|---|---|
| MPN | 9-30740 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Code: | 9-30740 |
| Description: | AirSense Spare Stratos Micra 100 detector |
| Dimensions: | W:300mm x H:220mm x D:85mm |
| Operating voltage: | 21.6 to 26.4 VDC |
| User interface: | Indicators: LED |
| Networking: | SenseNET (RS-485) On-board |
| Output: | Standard: 2 - Alarm (n/o) and Fault (n/c) Rating: 500mA @ 30V Expansion: Optional input and relay card |
| Current consumption: | 400 mA |
| Detection principle: | Laser light scattering mass detection and particle evaluation |
| Particle sensitivity range: | 0.003μ to 10μ |
| Measurement range (%Obs/m): | 0.0015 to 25 % |
| Alarm levels: | 4 (Aux, Pre-alarm, Alarm and Alarm 2) |
| Sampling pipework: | Inlets: 2 Length: 100m maximum run (50m in moving air) Diameter: 27mm OD Sampling holes: up to 20 holes Exhaust: 1 (optional) |
| Operating temperature: | -10 to +60°C (EN54-20) |
| Relative humidity: | 0 to 90% non-condensing |
| IP Rating: | IP40, Indoor |
| Material (body): | Sheet steel enclosure |
| Cable entries: | 2 x M20 |
| Mounting type: | Wall |
| Colour: | Cream |
| Certification: | EN54-20 |
| Weight: | 3.8kg |
More from AirSense
