This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Advanced QuickZone 4 Zone Conventional Fire Panel (QZ-4)
SKU
QZ-4
£309.01 £257.51
Advanced QuickZone 4 Zone Conventional / Twin Wire Fire Alarm Panel (QZ-4)
The Advanced QuickZone is a conventional / twin wire (sav-wire) fire alarm control panel with an internal power supply and space to accommodate back-up batteries (max 2 x 12v 3.2Ah). This control panel is designed to be easy to install, maintain and simple to operate for the end user of the system continuing the same high quality and reliability standards that Advanced are well known for.
The panel can be configured for either conventional or 'twin wire' setup using a simple DIL switch selection so this panel can be retro-fitted easily into an existing system with either setup. The internal DIL switches also enable Zone interface setting and access to the Level 3 mode (please see further down for information on the access levels).
There are 3 access levels available on this panel which are as follows:
Level 1 (Standard) - In access Level 1 the panel will provide indication of any faults (supply, fire, system or general). The panel will also indicate which zones are in fire / fault and any disablements. Sounder Circuit and Auxiliary Output status will be displayed including if the panel is in test mode.
Level 2 (Controls Enabled) - In access Level 2 the controls enabled include Silence, Resound and Reset. You can establish test and disable modes at this level, mute the internal fault buzzer and test the functionality of all LED indicators.
Level 3 - In access Level 3 you can select Type 'A' dependency per, view and edit dependency functions as well as restoring the systems factory default settings. You can select the sounder resound options for zones (EN54 requirement) and set the internal buzzer volume.
The Advanced QuickZone control panels are compatible with a flexible range of conventional detection devices including Apollo, Nittan, Hochiki and Argus. The panels are also fully approved to EN54-2 & 4 (Fire Detection and Alarm Systems - Control & Indicating Equipment).
Please Note: The twin-wire mode requires the use of 'sav-wire' detector bases and polarised 470Ω manual call points.
| Key Features |
|---|
| > Configurable for conventional / twin wire setup via a simple DIL switch > Available in 2 Zone or 4 Zone variants > Simple colour coded buttons for system controls and programming > Integral 1amp switch mode Power Supply Unit > Fire and fault relays > Class change and alert inputs > Accommodates up to 2 x 12v 3.2Ah back-up batteries > 2 monitored sounder circuits > Test mode > Key-switch or code entry can be used for activation of controls > 3 year manufacturer's warranty > Approved to EN54-2 & 4 |
| Manufacturer | Advanced Electronics |
|---|---|
| MPN | QZ-4 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Model Number | QZ-4 |
| LED indicators: | 5 red (1x Fire & 4x Zonal), 1 Green (Power), 13 Amber (4x Zonal, 9x Fault & System) |
| Controls: | 3 Colour coded buttons (Resound, Silence & Reset), 1-4 numerical buttons and Enter |
| Key-Switch Input: | Level 2 access enable key-switch or code entry |
| Programming: | Via on-board buttons |
| Zonal circuit configuration: | Conventional or Twin Wire (Selectable by DIL switches) |
| Number of Fire Zones: | 2 or 4 (dependant on QZ-2 or QZ-4) |
| On-Board Sounder Circuits: | 2 Monitored (Fused 500mA) |
| On-Board Relays: | 2 Auxiliary Clean C/O Relays Max. 3A @30Vdc (1 Fire, 1 Fault) |
| Mains Supply: | 230V 50Hz (+10%, -15% tolerance) 1.0A Max |
| Auxiliary Supply: | 28Vdc 400mA (Continuous load) |
| Programmable Inputs: | Class Change & Alert |
| Battery Capacity: | 2x 3.2Ah (Internal 12V SLA) |
| Charger Current: | 630mA (27.0Vdc at 20°C Temperature compensated) |
| Enclosure/Colour: | Lockable, Steel IP30 / RAL7035 |
| Cable Entry (20mm Knockouts): | 13 x Top & 7 x Rear |
| Size H x W x D (mm): | Back box 250x300x80, Door 260x308x23 (Return) |
| Approvals: | EN54-2:1997 + A1:2006 & EN54-4: 1997 + A1:2002 + A2:2006 |
More from Advanced Electronics
