Discontinued Product
Advanced MxPro Ad-Net / Fibre Optic Converter Multi-Mode (MXP-631-MM)
Discontinued
Alternative Products
Product Details for Advanced MxPro Ad-Net / Fibre Optic Converter Multi-Mode (MXP-631-MM)
The Mxp-631 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. Mxp-631 converters are used to extend serial transmission up to 5km (Mxp-631-MM with multi-mode fiber) or up to 40km (Mxp-631-SM with single-mode fiber).
The Mxp-631 converters can be configured to convert either RS-232 signals, or RS422/485 signals, but not both at the same time. The Mxp-631 converters can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a device's baudrate is changed, the signal will still be transmitted through the media converter without any data loss.
The Mxp-631 converters can be used to connect serial devices to a fiber ring. To form the ring, connect to the Tx port of one Mxp-631 to the Rx port of a neighbouring converter. Once the ring is set up, simply use the DIP switches to configure the Mxp-631 converters for "ring mode". When one node transmits a signal, the signal travels around the ring until it returns back to the transmitting unit, which then blocks the signal. With the Mxp-631, you can set up fiber rings that have a total circumference of up to 100km.
ADDC® is a patented hardware data flow solution to handle RS-485 data direction control. ADDC® senses and controls RS-485 data direction automatically, making it unnecessary to use the hand shaking signal.
Please note: this way of communication is not EN54 approved.
Key Features of the MXP-631-MM |
|---|
|
> Extends RS-232/422/485 transmission up to : 5 km with multi-mode
> 5 km with multi-mode - Mxp-631-MM > Compact size > Protects against electrical interference and chemical corrosion > Supports baudrates of 50 bps to 921.6 Kbps > Wide temperature models available (-40 to 75°C) > 3 Year Manufacturer Guarantee |
| Brand | Advanced Electronics |
|---|---|
| Manufacturer Part No. | MXP-631-MM |
FAQ’s for Advanced MxPro Ad-Net / Fibre Optic Converter Multi-Mode (MXP-631-MM)
Product Specification for Advanced MxPro Ad-Net / Fibre Optic Converter Multi-Mode (MXP-631-MM)
| Fiber Connector | SC or ST |
| Transmission Distance | Single Mode: 40km / Multi Mode: 5km |
| Wavelength | Single-mode: 1310nm / Multi-mode: 850nm |
| Cable Requirements | Single-mode: 8.3/125, 8.7/125, 9/125 or 10/125 Multi-mode: 50/125, 62.5/125 or 100/140 | Dimensions | Without ears: 67 x 100 x 22mm (2.64 x 3.94 x 0.87in) With ears: 90 x 100 x 22mm (3.54 x 3.94 x 0.87in) |
