• 
• 
• 
• 
• 
• 

• 
• 
• 
• 
• 
• 

Product Code: HM-SN-1

Customer Rating:

• Ready - Add a Smart RF Module to enable wireless interlinking of up to 50 FireAngel Smart RF devices, including the FireAngel Connect Gateway (also compatible with Wi-Safe 2 products)
• Provides Class A1 heat detection
• Suitable for Grade D1 systems
• Kitemarked to BS 5446-2: 2003
• 5 year manufacturer warranty
• Mixed system compatibility, hard-wire interlink with up to 30 alarms or wireless interlink with up to 50 alarms by adding a Smart RF / Wi-Safe 2 module
• Mains powered, with tamper-proof sealed for life battery back-up
• Low energy usage (approximately 10% less than the average AC fire alarm)
• 85dB sounder
• Suitable for use in areas where smoke alarms may not be appropriate due to fumes or dust (e.g. kitchens, garages, lofts)
• Designed to prevent dust ingress and draughts into the back of the device
• Easy to install with an integrated ultra-slim mounting base
• Combined test/silence/locate button
• Intelligent locate feature for quick identification of triggered devices
• Silence function for low battery chirp and known false alarms
• Meets the requirements of the 2021 Scottish Legislation for fire alarms in homes

The FireAngel HM-SN-1 is a 230V mains powered heat alarm, with tamper-proof sealed for life battery backup and hard-wired interlinking capabilities. Under typical usage conditions, it uses approximately 10% less power than the average AC fire alarm, and has a battery life of 10 years.

Its integrated ultra-slim mounting base ensures easy installation in areas such as kitchens, garages, or lofts—areas where smoke alarms would be unsuitable due to high levels of fumes or dust.

'Sleep Easy' functionality enables the low battery chirp to be silenced for an 8 hour period (this function can be used up to a maximum of 10 times). The alarm can be temporarily silenced for up to 10 minutes in the case of a known false activation, however if the level of heat detected is very high, this feature will be overridden for your safety and the alarm will continue to sound. When the combined test/silence/locate button is pressed on any device on the network, all connected devices except the device that was triggered will be silenced, offering easy identification of the unit in alarm.

This product provides Class A1 heat detection, and is appropriate for use in Grade D1 systems. It is approved to BS 5446-2: 2003. The manufacturer warranty period is 5 years.

Interconnection

This alarm can be linked with up to 30 units via hard-wiring using 3 core and earth cable. When any device on the system is activated, the 85dB sounders will sound on every other interlinked unit.

Wireless interlinking is also possible with up to 50 compatible alarms by adding a Smart RF / Wi-Safe 2 module.

How to Wirelessly Interlink FireAngel Smart RF Alarms

Thermistek Technology

Thermistek technology employs a unique radiant heat dish to maximise alarm performance during exposure to a radiant heat source. This product constantly monitors for temperature change, so that the alarm will sound earlier if the temperature is predicted to rise above a predetermined threshold.

Pack Contents

• Wall Fixings
• Instruction Manual

Compatible Devices

The below devices are compatible with the FireAngel HM-SN-1 Heat Alarm:

Model Number	Model Type	Interconnection Type
FS2126-T	Battery Smoke Alarm	Wireless (requires FS1521W2-T Smart RF plugin module for each alarm)
SM-SN-1	Mains Smoke Alarm	Hardwire or Wireless (requires FS1521W2-T Smart RF plugin module for each alarm)
FS1226-T	Battery Heat Alarm	Wireless (requires FS1521W2-T Smart RF plugin module for each alarm)
HM-SN-1	Mains Heat Alarm	Hardwire or Wireless (requires FS1521W2-T Smart RF plugin module for each alarm)
FS1326-T	Battery CO Alarm	Wireless (requires FS1521W2-T Smart RF plugin module for each alarm)
FS1524W2-T	Wireless Test & Control Unit	Wireless (requires FS1521W2-T Smart RF plugin module for this alarm)
FS1552W2-T	Combined Strobe & Vibrating Pad	Wireless (requires FS1521W2-T Smart RF plugin module for this alarm)
WST-630	Battery Smoke Alarm	Wireless (requires FS1521W2-T Smart RF plugin module for this alarm)
WHT-630	Battery Heat Alarm	Wireless (requires FS1521W2-T Smart RF plugin module for this alarm)
W2-SVP-630	Combined Strobe & Vibrating Pad	Wireless (requires FS1521W2-T Smart RF plugin module for this alarm)
RLYM-1EU	Mains Relay	Hardwire interlink
WRLYM-1EU	Wireless Relay	Wireless (requires FS1521W2-T Smart RF plugin module for this alarm)

Manufacturer:	FireAngel
Product Code:	HM-SN-1
Supply Voltage:	230V AC, 50Hz
Battery Back-Up:	10 year lithium battery
Technology:	Thermistek & Smart RF
Alarm Sound Level:	85dB (A) at 3m (minimum)
Installation Positions:	Ceiling
Alarms at Temperature Range:	+54℃ to +65℃
Operating Temperature:	+4℃ to +38℃
Operating Humidity:	Up to 90% RH non-condensing
Storage Temperature:	-20℃ to +60℃
Storage Humidity:	Up to 93% RH non condensing
Plastic Material:	UL94 V0 flame retardant
Warranty:	5 years
Approvals:	BS 5446-2: 2003/CE
Max No. of Connected Units:	30 hard-wired
Dimensions:	141.5mm x 53mm

Downloads

Customer Reviews