This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
C-TEC ActiV O-R-3-2.5-17 Base VAD c/w 96dB(A) Sounder (BF432C/CC/W)
SKU
BF432C/CC/W
£36.94 £30.78
C-TEC ActiV O-R-3-2.5-17 Base VAD c/w 96dB(A) Sounder (BF432C/CC/W)
The C-TEC ActiV Base Mount range of conventional sounders and combined sounder visual alarm devices (VADs) are designed for use with C-TEC’s range of fire panels and other compatible third-party panels. However, compatibility testing with third-party panels
is recommended to ensure correct operation.
Their purpose is to visually and audibly alert building occupants of a fire alarm.
All bases can be optionally used as either:
- a stand-alone base device using a separately available locking white cap (Part No. BF330CTLIDW) / red cap (Part No. BF330CTLIDR), or
- a combined base device and detector (detectors are separately available and wired on a separate detection circuit). The base devices are compatible with C-TEC’s range of ActiV conventional detectors and other compatible third-party suppliers. Note the ActiV detector must be fitted using the C4408 range of ActiV bases.
The bases offer low current consumption, high sound output, high efficiency VADs, 31 selectable primary tones with selectable secondary tone set, two selectable volume levels and three selectable VAD flash rates. Tones, volume levels and VAD flash rates are changed using the base’s 8-way DIP switch.
All devices are third-party certified to EN 54-3 (Sounders) and EN 54-23 (Visual alarm devices - VADs).
Note: For compliance to EN 54-3 and EN 54-23, the supplied Quick Connect Plate (Part No. BF431QCP) must be used. The BF431QCP is an easy-to-fit mounting accessory that can assist with cabling to the bases.
| Key Features |
|---|
| > Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs). > Provides 'O-R-3-2.5-17' light distribution. > Ideally suited for use in corridors and other rectangular areas. > Impressive 96dB(A) sound output @ 1m. > 31 selectable primary and secondary tone pairs and two volume levels (high and low) > Three selectable VAD flash rates (0.5Hz, 1Hz, OFF) > Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz) > Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz) > Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use. > Supplied with a BF431QCP quick connect plate and detector spur wires. > IP21C rated. |
| Manufacturer | C-TEC |
|---|---|
| MPN | BF432C/CC/W |
| EAN | 5056059609744 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Approvals/Certifications | Certified to EN54-3 & 23 by the LPCB |
| Protocol/Compatibility: | Compatible with C-TEC's CFP, FP, MFP and EP203 conventional fire alarm panels and virtually all other makes (testing on third-party panels is recommended before use) |
| Application/Operation: | Designed to be ceiling mounted - either stand-alone with a red or white cap or as part of a stacked Sounder/VAD/Detector Base combination. |
| VAD category & coverage: | O-R-3-2.15-17 Rectangular coverage - ideal for corridor spaces |
| Flash rate & colour: | 0.5Hz; 1Hz or OFF / White |
| Supply/Operating Voltage: | 18 to 30V DC |
| Nominal SPL (Sound Pressure Level): | 96dB (A) |
| Alarm Current: | At 30Vdc: 12.2mA (0.5Hz) or 19.5mA (1Hz); At 18Vdc: 14.5mA (0.5Hz) or 25mA (1Hz) |
| Product Dimensions (mm): | 122mm diameter x 46mm deep (not optional detector and base) |
| IP rating: | IP21C (Weatherproof) |
| Weight: | 170g |
| Operating conditions/temperature: | -10ºC +55ºC. Max. 95% RH (Non-condensing) |
| Notes: | For compliance to EN 54-3 & EN54-23, the BF431QCP Quick Connect Plate must be used with the base device |
More from C-TEC
