Kentec Sigma CP 2 Zone Sav-Wire Fire Panel (T11020M2)

SKU
T11020M2
£279.56 £232.97
Kentec Sigma CP 2 Zone Sav-Wire Fire Panel (T11020M2)

The Kentec Sigma CP 2 Zone Sav-Wire Fire Panel (T11020M2) is a two-wire conventional fire alarm control panel designed for use with conventional devices and sav-wire detector bases from Apollo or Hochiki.

The Sigma CP sav-wire fire alarm control panel from Kentec is designed for the most demanding of conventional fire detection and alarm system applications. It is easy to install with a range of extensive configuration features to ensure suitability for new fire alarm installations or control panel replacements on older systems.

Configuration options are stored in non-volatile memory and are easily accessed via an intuitive user interface, which enables the configuration data to be viewed and changed efficiently.

Kentec Sigma CP control panels are compatible with most standard conventional detectors, call points and sounders combined with the use of sav-wire detector bases from Apollo and Hochiki.

The panel is Kitemarked by BSi to BS EN54-2 and BS EN54-4.

Powerful Features

The simple and intuitive programming interface on Sigma CP fire panels allows simple configuration of many parameters by entering simple codes which are listed on the inner door look up table and in the operation and maintenance manual.

Connectivity

Sigma CP control panels have a dedicated ‘two-wire’ serial bus for connection of repeater panels, ancillary relay boards or zonal sounder extension boards. Up to seven units may be connected to the serial bus which can be up to 1200 metres in length.

Ease of Installation

The elegant and simple construction of the panel enables the chassis to be completely dismantled by removing just two screws.


Key Features
> Compatible for use on BS5839: Part 1: 2017 installations
> Fully programmable using simple menu options
> Simple, single board construction
> Installer friendly
> Compatible with a wide range of conventional detection devices and sav-wire detector bases from Apollo and Hochiki
> Two monitored sounder outputs
> Three Amp power supply
> Auxiliary power output
> Kitemarked and certified to BS EN54-2 and BS EN54-4
More Information
ManufacturerKentec Electronics
MPNT11020M2
Write Your Own Review
You're reviewing:Kentec Sigma CP 2 Zone Sav-Wire Fire Panel (T11020M2)
Your Rating
Loading...

Sort By: 

Ask Question

All questions will be displayed after moderation.

No questions yet. Be the first to ask the question!
Construction1.2mm mild sheet steel
IP RatingIP30
FinishEpoxy powder coated
Colour - lid & boxBS 00 A 05 grey - fine texture
Colour - control panel & labelsRAL 7047 light grey - satin
Weight6kg
Supply Voltage230V AC (+10%/-15%)
Mains supply fuse1.6 Amp 250V
Power supply DC rating24V 3 Amps
Maximum battery size7Ah 12V (2 per panel)
Fault contract rating30V DC 1 Amp
Local fire contract rating30V DC 1 Amp
Fire contract rating30V DC 1 Amp
Sounder output rating0.5A per output (max 1.6A over all outputs)
Detection zone current1.6 milliamps
Detection zone EOL resistor6k8 5%
Sounder output EOL resistor10k 5%
Cable capacity2.5mm² per terminal
Operating temperature-5°C to +40°C
Operating humidity<95% (non condensing)
Kentec Sigma CP 2 Zone Sav-Wire Fire Panel (T11020M2)