Product Categories

C-TEC 5 Series 24V 5A Encased Switch Mode Power Supply PCB Only (BF562-5/E)

Product Code: BF562-5/E

Customer Rating: 0 stars

C-TEC 5 Series 24V 5A Encased Power Supply PCB Only (BF562-5/E) Key Features

  • A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements
  • Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
  • Includes the same electronics as our BF562-5 LPCB/VDS certified EN54-4/A2 boxed 24V 5A PSU.
  • Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
  • Includes a single-pole volt-free changeover relay that switches for any fault condition.
  • Includes a fault type & hazardous voltages present LED.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.

Product Information

The C-TEC BF562-5/E is a Mains to regulated DC PSU providing 5 A @ 24 Vdc nominal, designed for use with fire and security systems. Combining the functions of a PSU, battery charging unit and battery monitoring unit, it is designed and intended for use in OEM equipment. It is supplied with a protective ‘live parts’ cover.

The system designer must assure the compatibility to all relevant standards for the PSU within the installed enclosure. For full compliance with all relevant standards and directives, the PSU must be installed inside a suitable enclosure.

Technical Details

Approvals/certifications Includes the same electronics as our EN54-4/A2 certified BF562-5 PSU
Compatibility *** Full compliance with all relevant standards must be checked by the responsible person with the caged PSU installed in a suitable enclosure ***
Application/operation An encased Mains to regulated DC switch-mode/digital hybrid power supply providing 5A @ 24V DC. It includes a single pole volt-free changeover relay that switches for any fault condition. User customisable via a BF423 Configurator.
Mains supply 230V 50/60Hz.
Mains rated current 1.3A r.m.s.
Total output current limited to 5A (Max. output current).
Output I max.a: 4.6A or 4A selectable. A load greater than I max.a will temporarily reduce batt. charging. I.max.b: 5A, charging turned off via CONN6. Output is also customisable via a BF423 Configurator*.
Battery charge capacity 2.5Ah up to 17Ah (battery charged to 80% capacity in 24hrs). Output is customisable via a BF423 Configurator to suit different manufacturers' batteries*.
Max battery size and type Up to 17Ah VRLA dependent on the size of the enclosure the BF562-5/E is mounted in.
Indicators Supply Present (Green); General Fault (Amber); Auxiliary Fault (Amber); Hazardous Voltages Present (Red).
Connections Mains Input (CONN1); Supply Output (CONN3); Battery Input (CONN3); Fault Relay (CONN4); Charge Off Input (CONN5). Battery Charge Current Link (PLK1); Battery Monitoring On/Off Link (PLK2); High Temp. Output (PL2).
Expansion connections A remote thermistor can be connected via PL3 terminals.
Product dimensions (mm) 143mm H x 173mm W x 66mm D.
Construction & finish Zintec base, polycarbonate cover.
IP Rating Dependent on mounting enclosure.
Weight 665g (without batteries).
Operating conditions/temperature -5ºC to +40ºC. Max relative humidity: 95%.
Notes *Parameters configurable via a BF423 configurator are: Float voltage temp. compensation; Batt. charge rate (mA); Batt. impedance; Input/Output settings.

Customer Reviews

There are no reviews yet. Why not be the first?

Delivery Information

Returns & Refunds

£79.16 Ex Vat

£94.99 Inc Vat

In stock:In stock