This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Advanced MXP-550/D 3A EN54-4 PSU & Charger (Boxed - 38Ah Battery Capacity)
SKU
MXP-550/D
£289.33 £241.11
Advanced MXP-550/D 3A EN54-4 Power Supply Unit & Battery Charger (Boxed - 38Ah Battery Capacity)
The Advanced MXP-550/D is a full 24v 3A Power Supply Unit and Battery Charger, compliant with EN54-4 and with 38Ah battery capacity in a deep enclosure.
The Advanced 3.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment.
Suited for almost any application, the power supply unit/battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.
The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.
PSE and charger or PSE only options available on the 3.0A and 5.0A versions.
A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages / current measurements to compatible control panel / modules.
Applications
For any fire alarm system which specifies EN54-4 power supplies (e.g. BS5839 code of practice).
These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.
| Key Features |
|---|
| > 3.0A Power Supply Unit (24v) > Battery Charger (38Ah Capacity) > EN54-4 Compliant > A range of power supply equipment with power output options to suit most applications. > Universal AC input on the 3.0A and 5.0A versions > High efficiency switched mode power supply > Compact and sleek design |
| Manufacturer | Advanced Electronics |
|---|---|
| MPN | MXP-550/D |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Approvals | All power supply units are approved with the requirements of BS EN54-4 1998, EN55022 class B emissions limits & EN60950: 2000 safety standards. |
| Input Supply | 200-240V AC, 50/60Hz, fuse T3.15H250 |
| Output Voltage | Max 28.5V DC, Min 18.5V DC at minimum battery voltage of 19V with mains disconnected |
| Charger voltage | 27.4V DC nominal at 20°C temperature compensated over the range -5°C to +45°C |
| Output Current | 2.0A continuous load, 1.0A battery charge [3.0A to load if configured for PSU only] |
| Dimensions Boxed H x W x D mm | 410 x 363 x 185 |
| Environment | Indoor, dry |
| Fault Output | Volt-free change-over contacts rated 1A @ 30V dc |
| On Board Indication | Mains Fail, Charger Fail, Battery Open Circuit, Battery Low & Heartbeat |
More from Advanced Electronics
