Nittan EV-DIN-SCI DIN Rail Mounting SC Isolator

SKU
EV-DIN-SCI
£16.76 £13.97
Nittan EV-DIN-SCI DIN Rail Mounting Short Circuit Isolator
  • Buy 10 for £16.63 £13.86 each and save 1%
  • Buy 20 for £16.50 £13.75 each and save 2%
  • Buy 40 for £16.37 £13.64 each and save 2%

The EV-DIN-SCI is a DIN Rail mountable Short Circuit Isolator (-ve Line), suitable for use with all types of Evolution analogue addressable products, including detectors and I/O devices. The unit is designed for mounting inside a variety of widely available enclosures and can be used to Spur a small amount of addressable devices from the main Loop. The EV-DIN-SCI is designed to provide Short Circuit Protection, without the need for any special device setting and is self resetting if the fault clears.

Note: +ve and -ve isolator styles cannot be mixed on a system.  Not compatible with Advanced MxPro4 (Mx4000) Panel. Please use Non-SCI model. Contact Nittan Technical Support for more details and information on panel compatibility.


Key Features
> -ve Line Isolator*
> Low quiescent current
> Self resetting when fault clears
More Information
ManufacturerNittan
MPNEV-DIN-SCI
Write Your Own Review
You're reviewing:Nittan EV-DIN-SCI DIN Rail Mounting SC Isolator
Your Rating
Loading...

Sort By: 

Ask Question

All questions will be displayed after moderation.

No questions yet. Be the first to ask the question!
Operating voltage:22 VDC to 38 VDC
Quiescent current:60 µA
Current when short circuited:13 mA
Ingress protection:IP20
Operating temperature:-10°C to +55°C
Relative humidity:RH 95%
Cable terminals:Max 2.5 mm2
Material:PC/ABS
Weight:60g
Minimum sw open voltage (Vso min):9 VDC
Maximum sw open voltage (Vso max):11 VDC
Minimum sw close voltage (Vsc min):10 VDC
Maximum sw close voltage (Vsc max):12 VDC
Maximum line current (Ic max):800 mA
Maximum switching current (Is max):1500 mA
Maximum leakage current (Il max):13 mA
Maximum switch resistance (Zc max):120 mΩ
Test Standards:EN54-17: 2005 / AC: 2007
Nittan EV-DIN-SCI DIN Rail Mounting SC Isolator