This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
EV-3IO
£131.06 £109.22
Nittan EV-3IO Triple Input/Output Module with Isolator
- Buy 10 for £130.03 £108.36 each and save 1%
- Buy 20 for £129.00 £107.50 each and save 2%
- Buy 40 for £127.97 £106.64 each and save 2%
The Nittan EV-3IO is a Triple Input / Output module, with integral –ve line Short circuit isolator compatible with Evolution analogue addressable system devices.
The Module includes setting options for a normally closed contact input and Fail Safe mode for Door release requirement.
LEDs are provided to Indicate Input & Output active, Fault and Isolator Open. Remote LED outputs are provided Relay status, Fault and Isolator Open indication.
Device address may be set using EV-AD2-EXT Hand held programmer.
The Short Circuit Isolator will protect the system, whilst allowing the device to continue communication from the opposite side. The isolator will self-reset when the fault clears.
Not compatible with Advanced MxPro4 (Mx4000) Panel. Please use Non-SCI model.
It is not possible to mix +ve and -ve isolator styles on a system.
The following resistors are required for Fault and Alarm monitoring:
- EOL = 10k Ohm
- Alarm = 470 / 680 Ohm
Key Features |
---|
> Loop Powered > 3 x Class B Inputs > 1 x 5A@240Vac Rated Relay > 2 x 1A@30Vdc Rated Relay > Integral -ve Isolater > Failsafe option for Door Release > EEPROM Addressed (Programmer) |
Manufacturer | Nittan |
---|---|
MPN | EV-3IO |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Operating loop voltage | 20 to 38 Vdc |
Quiescent current | 860 µA |
Alarm current | 8.3 mA |
Current in short circuit | 15 mA |
Inputs | 3 x Class B |
Output relay contact rating | 2 x 1 Amps @ 30 Vdc 1 x 5 Amps @ 240 Vac or 5 Amps @ 30 Vdc |
Operating temperature | -10°C to +55°C |
Storage temperature | -40°C to +65°C |
Relative humidity | < RH 95% (Non-condensing) |
Cable terminals | 0.75 to 2.5 mm2 |
Material | PC/ABS |
Weight | 475 g |