This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Advanced MXP-046 Damper Interface Module (Apollo Protocol)
SKU
MXP-046
£405.95 £338.29
Advanced MXP-046 Damper Interface Module (Apollo Protocol)
The Advanced MXP-046 Damper Interface is a loop driven device that utilises the Apollo protocol. The device is a fully monitored interface providing confirmation of the damper open and closed positions.
For use with dampers that are normally held open. Fail-safe operation only applicable to electrically opened & mechanically closed dampers.
Compatibility
Use with dedicated damper panels using Apollo protocol devices MxPro 5 series fire panels require version 050-05a (or higher) program to use with Apollo protocol devices PC configuration program must be 6.20 (or higher) to support damper interface units.
| Key Features |
|---|
| > Damper motor drive and limit switch monitoring integrated into a single unit > Dual limit switch inputs for confirmation of damper-fully-open, and damper-fully-closed positions > Selectable monitoring on switch inputs to prevent short circuits in the wiring from giving false position readings > Fail-safe options in case of data errors in the communications loop |
| Manufacturer | Advanced Electronics |
|---|---|
| MPN | MXP-046 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Enclosure Dimensions H x W x D mm | 300 x 200 x 150 - Steel IP66 |
| Colour | RAL 7032 Light Grey |
| Weight | 4Kg |
| PCB Dimensions H x W x D mm | 35 x 142 x 70 |
| Operating Temperature | -5°C to 40°C |
| Relative Humidity | 95% non-condensing (maximum) |
| Mains Supply | 230V AC, 50Hz (+10%,-15%), 30mA (plus motor load) |
| Motor Switch Rating | 1.0A |
| Fuse (PCB) | T3.15H250V |
| Fuse (Fuse terminal block) | T3.15H250V |
| Data loop current | 1.6mA |
More from Advanced Electronics
