This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
MXP-046-BX1
£568.03 £473.36
Advanced MXP-046-BX1 Damper Interface Module - Boxed (Apollo Protocol)
The Advanced MXP-046-BX1 Damper Interface is a boxed loop driven device that utilises the Apollo protocol. The device is a fully monitored interface providing confirmation of the damper open and closed positions.
For use with dampers that are normally held open. Fail-safe operation only applicable to electrically opened & mechanically closed dampers.
Compatibility
Use with dedicated damper panels using Apollo protocol devices MxPro 5 series fire panels require version 050-05a (or higher) program to use with Apollo protocol devices PC configuration program must be 6.20 (or higher) to support damper interface units.
Key Features |
---|
> Damper motor drive and limit switch monitoring integrated into a single unit > Dual limit switch inputs for confirmation of damper-fully-open, and damper-fully-closed positions > Selectable monitoring on switch inputs to prevent short circuits in the wiring from giving false position readings > Fail-safe options in case of data errors in the communications loop |
Manufacturer | Advanced Electronics |
---|---|
MPN | MXP-046-BX1 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Enclosure Dimensions H x W x D mm | 300 x 200 x 150 - Steel IP66 |
Colour | RAL 7032 Light Grey |
Weight | 4Kg |
PCB Dimensions H x W x D mm | 35 x 142 x 70 |
Operating Temperature | -5°C to 40°C |
Relative Humidity | 95% non-condensing (maximum) |
Mains Supply | 230V AC, 50Hz (+10%,-15%), 30mA (plus motor load) |
Motor Switch Rating | 1.0A |
Fuse (PCB) | T3.15H250V |
Fuse (Fuse terminal block) | T3.15H250V |
Data loop current | 1.6mA |