This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
MXP-034-BXP
£585.73 £488.11
Advanced MXP-034-BXP Peripheral Bus 4-Way Sounder Card with 4A PSU (Boxed)
The Advanced MXP-034-BXP Programmable 4-Way Sounder Card is an optional peripheral unit with a 4A Power Supply Unit that provides four individually programmable, and monitored, sounder output circuits compliant with BSEN54-2: 1998 Clause 7.8.
Up to 16 cards can be connected to a multi-loop panel providing a maximum of 64 additional local sounder outputs. Each output is fully programmable using the powerful dynamic cause-and-effect rules, and all outputs are synchronised.
The unit is available as either a printed circuit card only or as a boxed version with integral 4A power supply
Applications / Limitations
EN54-2 compliant sounder outputs. Can be used with MxPro 4 2, 4 & 8 loop control panels programmed with version 020-02 software, or later, and fitted with base card hardware revision levels 10 (712-1022 MxPro 5 4 loop) and 09 (712-1022-002 MxPro 5 2 loop ) or later.
Requires installation of the Peripheral Bus Interface Adaptor card in the panel when using the MxPro 4 series.
Key Features |
---|
> Each output is 1A rated, and monitored for open and short circuits. > Each output is individually programmable using the Dynamix cause-and-effects rules. > All outputs can be synchronised in pulsing modes. > Up to 16 cards can be connected giving a total of 64 additional outputs. > Each output may be individually programmed > Easily configured via PC-NET-003 > 3 year warranty as standard |
Manufacturer | Advanced Electronics |
---|---|
MPN | MXP-034-BXP |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Applicable Standards | BS EN54-2; 1998, BS EN54-4: 1998 |
Operating Temperature | -5°C to 40°C |
Relative Humidity | 95% non-condensing (maximum) |
PCB Dimensions H x W x D mm | PCB 110 x 86 x 18 |
PCB Weight | 75 grams |
Enclosure | Steel, IP30, RAL9002 |
Enclosure Dimensions H x W x D mm | 320 x 345 x 88 |
Weight | 5 kg (excluding batteries) |
Knockouts 20mm | 7 x top, 2 x bottom |
AC Supply | 230V AC, 50Hz (+10%, -15%) FUSE T3. 15H250 |
Standby Battery | 2 x 12V, 7AH Sealed lead-acid type (Yuasa recommended) |
LED Indications (PCB) | Sounder circuit on, communications TX & RX and heartbeat |
LED Indications (Box) | Power and general PSU fault - separate indications of specific PSU fault conditions are available on the PSU. |